contacter le fournisseur

Mr. Victor Pan

Laisser un message

Contacter Maintenant

Tu peux aimer

Film BOPP pour condensateur Application Condensateurs AC / DC Contacter Maintenant

 





BOPP Film brumeux pour condensateur

Quantité de commande minimum:

1 Piece/Pieces

Contacter Maintenant

< >

Overview

Attributs du produit

Origin: Foshan, Guangdong, China

Type: Film

Trademark: FSPG Products

HS Code: 3920209090

Production Capacity: 10000mt/Y

For Metallization: MP-1

High Temperature Resistance: MP-H

Emballage & livraison

Informations de base.

Code hs

3920209090

Capacité de production

10000mt / y

Film de base métallisé BOPP pour condensateur

Items		Test Methods	Units	Typical Value
Thickness		GB 6672	μm	7
Ave. Variation of Thickness		GB/T13541	%	+0.2
Tensile strength (MD/TD)		GB 13022	MPa	160/280
Elongation at Break (MD/TD)		GB 13022	%	145/50
Heat Shrinkage (MD/TD)	MP-1	GB 12026	%	3.5/0.5
Heat Shrinkage (MD/TD)	MP-H	GB 12026	%	3.0/0.1
Density		GB 1033	g/cm³	0.91
Surface Roughness(in/out)		GB/T13541	μm	0.08/0.08
Wet Tension (Treated Side)		GB/T 14216	mN/m	40
Dielectric Strength(Ave/Min)DC		GB/T13541	V/μm	496/406
Dielectric Constant		GB/T 13541	--	2.2
Dielectric Consumed Angle tangent		GB/T 13541	--	2.0×10^-4
Volume Resistivity		GB/T 13541	Ω·m	1.9×10¹⁵

BOPP Film brumeux pour condensateur

Items			Units	Typical Value
Thickness			μm	15
Ave. Variation of Thickness			%	+0.2
Tensile strength (MD/TD)			MPa	155/258
Elongation at Break (MD/TD)			%	125/49
Heat Shrinkage (MD/TD)			%	3.0/0.3
Voidage	Average		%	10.6
	Max.			11.1
	Min			10.1
Dielectric Strength DC	Average		V/μm	550
	Min.			515
Electric strength (d.c. test)	Central value		V/μm	356
	Not more than 1 of 21 results shall be below			305
Dielectric Constant			--	2.2
Dissipation factor			--	2.0×10^-4
Volume Resistivity			Ω·m	3.2×10¹⁵
Surface Roughness(In/Out)		Ra	μm	0.42/0.40

Items			Units	Typical Value
Thickness			μm	15
Ave. Variation of Thickness			%	+0.2
Tensile strength (MD/TD)			MPa	155/258
Elongation at Break (MD/TD)			%	125/49
Heat Shrinkage (MD/TD)			%	3.0/0.3
Voidage	Average		%	10.6
	Max.			11.1
	Min			10.1
Dielectric Strength DC	Average		V/μm	550
	Min.			515
Electric strength (d.c. test)	Central value		V/μm	356
	Not more than 1 of 21 results shall be below			305
Dielectric Constant			--	2.2
Dissipation factor			--	2.0×10^-4
Volume Resistivity			Ω·m	3.2×10¹⁵
Surface Roughness(In/Out)		Ra	μm	0.42/0.40